Connect with us

News

SpaceX’s first orbital Starship engine just breathed fire

Published

on

Less than three weeks after shipping to Texas, SpaceX says that Starship’s first Raptor Vacuum engine has completed a “full duration test fire” on the march towards orbital test flights.

Known as Raptor Vacuum or RVac, the engine is almost entirely based off of its sea level-optimized cousin, taking all of the complex turbomachinery and combustion chambers that represent the bulk of a rocket engine. Things start to diverge below the throat of the combustion chamber (the narrow part of the central hourglass-like curve), where SpaceX has expanded Raptor’s existing bell nozzle by a factor of five or more.

SpaceX’s reusable Starship spacecraft will use a mix of three sea level Raptors and three Raptor Vacuum engines to give it the thrust it needs to reach orbit and ensure efficient operations both in atmosphere and vacuum.

Raptor Vacuum (roughly) to scale alongside Raptor Sea Level, a Space Shuttle Main Engine (SSME), and a Saturn V F-1. (Teslarati)

In simple terms, a rocket engine can benefit from a vacuum-optimized nozzle because the added surface area (more or less) gives the extremely high-pressure gases exiting its combustion chamber even more footholds to push against. Rocket nozzles are at their most efficient when the engine’s exhaust gas finishes expanding to match ambient pressure at the exact moment it exits the bell. Logically, at sea level on Earth, the ambient air pressure is quite high, meaning that rocket exhaust doesn’t have to expand as much to equalize.

In the vacuum of space, however, exhaust gases must expand far more to reach the same pressure as its surroundings. For rocket propulsion, that extra expansion can be exploited to make a more efficient engine, squeezing extra energy out of the same propellant and in a perfect vacuum, the most efficient nozzle would technically be infinite. Engineering and physical infinities don’t exactly get along, unfortunately, so vacuum rocket engineers are forced to settle on a nozzle size at a scale that humans can feasibly manufacture.

In theory, Starship doesn’t need Raptor Vacuum engines to be a functioning orbital spacecraft and CEO Elon Musk himself floated a design with seven sea-level engines just two years ago. Since then, the SpaceX CEO revealed that Raptor was making such good progress that the company undid the removal of vacuum-optimized engines from Starship’s baseline design.

Look, Ma, no vacuum engines! (SpaceX)

It’s unclear exactly what SpaceX means when it says that Raptor Vacuum SN1 completed a “full duration test fire.” For Starship, a full-duration orbital insertion burn – beginning immediately after Super Heavy booster separate – would likely be no shorter than five or six minutes. Even for SpaceX, going from shipping the very first engine (Raptor Vacuum) produced to a successful several-minute static fire in less than three weeks’ time would be an almost inconceivable feat of engineering. The feat would imply that SpaceX is already extremely comfortable with several-minute Raptor burns – perhaps the single biggest hurdle standing between Starship and orbit.

More likely, “full duration test fire” simply refers to the fact that the pathfinder Raptor Vacuum engine managed to ignite, burn, and shut down on schedule – avoiding a premature shutdown, in other words. For an engine as large and complex as Raptor, even that downgraded interpretation would represent an impressive achievement.

Advertisement

Check out Teslarati’s Marketplace! We offer Tesla accessories, including for the Tesla Cybertruck and Tesla Model 3.

Eric Ralph is Teslarati's senior spaceflight reporter and has been covering the industry in some capacity for almost half a decade, largely spurred in 2016 by a trip to Mexico to watch Elon Musk reveal SpaceX's plans for Mars in person. Aside from spreading interest and excitement about spaceflight far and wide, his primary goal is to cover humanity's ongoing efforts to expand beyond Earth to the Moon, Mars, and elsewhere.

Comments

Investor's Corner

Tesla Board member and Airbnb co-founder loads up on TSLA ahead of robotaxi launch

Tesla CEO Elon Musk gave a nod of appreciation for the Tesla Board member’s purchase.

Published

on

(Credit: Tesla)

Tesla Board member and Airbnb Co-Founder Joe Gebbia has loaded up on TSLA stock (NASDAQ:TSLA). The Board member’s purchase comes just over a month before Tesla is expected to launch an initial robotaxi service in Austin, Texas.

Tesla CEO Elon Musk gave a nod of appreciation for the Tesla Board member in a post on social media.

The TSLA Purchase

As could be seen in a Form 4 submitted to the United States Securities and Exchange Commission (SEC) on Monday, Gebbia purchased about $1.02 million worth of TSLA stock. This was comprised of 4,000 TSLA shares at an average price of $256.308 per share.

Interestingly enough, Gebbia’s purchase represents the first time an insider has purchased TSLA stock in about five years. CEO Elon Musk, in response to a post on social media platform X about the Tesla Board member’s TSLA purchase, gave a nod of appreciation for Gebbia. “Joe rocks,” Musk wrote in his post on X.

Gebbia has served on Tesla’s Board as an independent director since 2022, and he is also a known friend of Elon Musk. He even joined the Trump Administration’s Department of Government Efficiency (DOGE) to help the government optimize its processes.

Advertisement

Just a Few Weeks Before Robotaxi

The timing of Gebbia’s TSLA stock purchase is quite interesting as the company is expected to launch a dedicated roboatxi service this June in Austin. A recent report from Insider, citing sources reportedly familiar with the matter, claimed that Tesla currently has 300 test operators driving robotaxis around Austin city streets. The publication’s sources also noted that Tesla has an internal deadline of June 1 for the robotaxi service’s rollout, but even a launch near the end of the month would be impressive.

During the Q1 2025 earnings call, Elon Musk explained that the robotaxi service that would be launched in June will feature autonomous rides in Model Y units. He also noted that the robotaxi service would see an expansion to other cities by the end of 2025. “The Teslas that will be fully autonomous in June in Austin are probably Model Ys. So, that is currently on track to be able to do paid rides fully autonomously in Austin in June and then to be in many other cities in the US by the end of this year,” Musk stated. 

Continue Reading

News

Stellantis unveils solid-state battery for EVs

Stellantis validated solid state battery cells for EVs: ultra-dense, fast-charging, and AI-optimized. Launching demo fleet by 2026.

Published

on

stellantis-solid-state-battery-electric-vehicles
(Credit: Stellantis)

Stellantis N.V. and Factorial Energy have validated Factorial’s automotive-sized FEST® solid-state battery cells, a major milestone for next-generation electric vehicle (EV) batteries. The breakthrough positions Stellantis and Factorial to advance EV performance with lighter, more efficient batteries.

“Reaching this level of performance reflects the strengths of our collaboration with Factorial.

“This breakthrough puts us at the forefront of the solid-state revolution, but we are not stopping there. We continue working together to push the boundaries and deliver even more advanced solutions, bringing us closer to lighter, more efficient batteries that reduce costs for our customers,” said Ned Curic, Stellanti’s Chief Engineering and Technology Officer.

The 77Ah FEST® cells achieved an energy density of 375Wh/kg, supporting over 600 cycles toward automotive qualification. Unlike lithium-ion batteries, these solid-state cells charge from 15% to over 90% in 18 minutes at room temperature and deliver high power with discharge rates up to 4C. Factorial’s AI-driven electrolyte formulation enables performance in temperatures from -30°C to 45°C (-22°F to 113°F), overcoming previous solid-state limitations.

Advertisement

“Battery development is about compromise. While optimizing one feature is simple, balancing high energy density, cycle life, fast charging, and safety in an automotive-sized battery with OEM validation is a breakthrough,” said Siyu Huang, CEO of Factorial Energy. “This achievement with Stellantis is bringing next-generation battery technology from research to reality.”

The collaboration optimizes battery pack design for reduced weight and improved efficiency, enhancing vehicle range and affordability. Stellantis invested $75 million in Factorial in 2021 and plans to integrate these batteries into a demonstration fleet by 2026. This fleet will validate the technology’s real-world performance, a critical step toward commercialization.

The milestone aligns with Stellantis’ push for sustainable EV solutions, leveraging Factorial’s disruptive technology to meet the rising demand for high-performance batteries. As the companies refine pack architecture, the validated cells promise faster charging and greater efficiency, potentially reshaping the EV market. With the demonstration fleet on the horizon, Stellantis and Factorial are poised to lead the solid-state battery push, delivering cost-effective, high-range EVs to consumers.

Continue Reading

News

Tesla China vehicle registrations rise 51% in April’s fourth week

In the week ending April 27, Tesla China saw 10,300 new vehicle registrations.

Published

on

Credit: Tesla China

Tesla China’s new vehicle registrations saw a notable rise in the week of April 21-27, 2025. Over the week, the electric vehicle maker’s registrations saw an impressive 51% week-over-week rise, suggesting that domestic vehicle deliveries are on the rise once more. 

Tesla China Results

In the week ending April 27, Tesla China saw 10,300 new vehicle registrations. This represents a notable rise from the company’s registration numbers in the past weeks of April. For context, Tesla China saw 3,600 registrations in the week ending April 6, 5,400 registrations in the week ending April 13, and 6,780 registrations in the week ending April 20, 2025.

Considering that April is the first month of the second quarter, expectations were high that Tesla China was allocating Giga Shanghai’s output for vehicle exports. With 10,300 registrations in the week ending April 27, however, it would appear that the company’s domestic deliveries are picking up once more.

Tesla China does not report its weekly sales figures, though a general idea of the company’s overall perforce in the domestic auto sector can be inferred through new vehicle registrations. Fortunately, these registrations are closely tracked by industry watchers, as well as some local automakers like Li Auto.

Tesla Model 3 and Model Y in Focus

Tesla China produces the Model Y and Model 3 in Giga Shanghai. Both vehicles are also exported from China to foreign territories. As per industry watchers, it would appear that both the Model 3 and Model Y saw an increase in registrations in the week ending April 27.

Advertisement

The Model 3, for one, appears to have seen 3,200 registrations in the week ending April 27, a 14% increase from the 2,800 that were registered in the week ending April 20. For context, Tesla China saw just 1,500 new Model 3 registrations in the week ending April 13 and 1,040 registrations in the week ending April 6.

The Model Y, on the other hand, saw 7,100 registrations in the week ending April 27. That’s a 77.5% increase from the 4,000 that were registered in the week ending April 20. Tesla also saw 3,900 registrations in the week ending April 13, and 2,540 registrations in the week ending April 6, 2025.

Continue Reading

Trending